C70   

Lu, R.; Shen, Y. (2023) “Industrial fluid degradation monitoring with an electromechanical impedance active sensor”, Proceedings of the ASME 2023 International Mechanical Engineering Congress & Exposition, Oct. 29-Nov. 2, 2023, New Orleans, Louisiana, USA   

C69   

Jiang, H.; Zhang, T.; Shen, Y. (2023) “Residual Stress Evaluation of Multilayer Viscoelastic Composites Using Ultrasonic Acoustoelastic Effects”, Proceedings of the ASME 2023 International Mechanical Engineering Congress & Exposition, Oct. 29-Nov. 2, 2023, New Orleans, Louisiana, USA   

C68   

Zhou, S.; Shen. Y. (2023) “Self-sensing piezoelectric composite structures via generation and reception of ultrasonic guided waves”, Proceedings of the ASME 2023 International Mechanical Engineering Congress & Exposition, Oct. 29-Nov. 2, 2023, New Orleans, Louisiana, USA  

C67   

Lao, D.; Shen. Y. (2023) “Condition monitoring of cutting tools by feature analysis of vibroacoustic sensing signals”, Proceedings of the ASME 2023 International Mechanical Engineering Congress & Exposition, Oct. 29-Nov. 2, 2023, New Orleans, Louisiana, USA   

C66   

Xu, H.; Shen. Y. (2023) “Nonreciprocal transmission of lamb waves via surface-bonded elastic metamaterial diode”, Proceedings of the ASME 2023 International Mechanical Engineering Congress & Exposition, Oct. 29-Nov. 2, 2023, New Orleans, Louisiana, USA  

C65   

Lu, R.; Shen, Y. (2023) “Electro-mechanical impedance spectroscopy leveraging zero group velocity modes for structural sensing”, 14th International Workshop on Structural Health Monitoring, September 12-14, 2023, Stanford, USA  

C64   

Lu, R.; Shen, Y. (2023) “Entire torque range monitoring of bolt loosening of bolted joints via nonlinear electromechanical impedance spectroscopy (NEMIS)”, 50th Annual Review of Progress in Quantitative Nondestructive Evaluation, Jul. 24-27, 2023, Austin, Texas, USA  

C63   

Zhou, S.; Shen. Y.; Tian, Y.; Wang, B.; Wang, C. (2023) “Self-sensing piezoelectric composite structures using disperse electro-mechanical impedance measurements”, 50th Annual Review of Progress in Quantitative Nondestructive Evaluation, Jul. 24-27, 2023, Austin, Texas, USA  

C62   

Lao, D.; Shen. Y.; Ren S.; Lin S.; Zhang F. (2023) “Battery health monitoring using guided wave signal features”, Review of Progress in Quantitative Nondestructive Evaluation, July 24–27,2023, Austin, Texas, USA   

C61

Peng, X.; Shen, Y. (2022) “Bolted lap joint monitoring using ultrasonic guided waves considering temperature variations”, Proceedings of the ASME 2022 International Mechanical Engineering Congress & Exposition, Oct. 30-Nov. 3, 2022, Columbus, Ohio   

C60

Lu, R.; Shen, Y. (2022) “Nonlinear Electro-Mechanical Impedance Spectroscopy for Comprehensive Monitoring of Carbon Fiber Reinforced Composite Laminates'', Proceedings of the ASME 2022 International Mechanical Engineering Congress & Exposition, Oct. 30-Nov. 3, 2022, Columbus, Ohio   

C59

Zhou, S.; Shen, Y. (2022) “Numerical investigation of ultrasonic phased array reverse time migration technique considering spatial wave characteristics”, Proceedings of the ASME 2022 International Mechanical Engineering Congress & Exposition, Oct. 30-Nov. 3, 2022, Columbus, Ohio   

C58

Shen, Y. (2022) “Exploring and manipulating guided wave features for structural health monitoring”, 2022 SPIE Smart Structures and NDE, Apr. 4-10, Digital Forum, Online (keynote paper)   

C57

Song, Y.; Shen, Y. (2022) “A magnetic fluid-solid interactive metamaterial for tunable elastic wave control”, 2022 SPIE Smart Structures and NDE, Apr. 4-10, Digital Forum, Online   

C56

Wang, J.; Shen, Y. (2022) “Numerical investigation of piezoelectric composite transducers for active sensing of concrete structures.”, 2022 SPIE Smart Structures and NDE, Apr. 4-10, Digital Forum, Online   

C55

Lu, R.; Shen, Y. (2022) “Nonlinear electro-mechanical impedance spectroscopy for fatigue crack monitoring”, 2022 SPIE Smart Structures and NDE, Apr. 4-10, Digital Forum, Online   

C54

Chen, M.; Shen, Y. (2021) “Multi-bolt loosening monitoring using a integrated vibro-acoustic modulation technique”, Proceedings of the ASME 2021 International Mechanical Engineering Congress & Exposition, Nov. 1-5, 2021, Virtual, Online  

C53

Tian, Y.; Shen, Y. (2021) “Peculiar transmission manipulation of antisymmetric Lamb waves via a surface-bonded single-layer elastic meta-structure”, Proceedings of the ASME 2021 International Mechanical Engineering Congress & Exposition, Nov. 1-5, 2021, Virtual, Online  

C52

Lu, R.; Shen, Y. (2021) “High-damping viscoelastic material monitoring using sub-resonator enhanced electro-mechanical impedance spectroscopy”, Proceedings of the ASME 2021 International Mechanical Engineering Congress & Exposition, Nov. 1-5, 2021, Virtual, Online  

C51

Wang, J.; Shen, Y.; Peng, X.; Han, Z.; Jiang, S. (2021) “An ultra-compliant and flexible structural sensing neural system for damage detection in wind turbine blades”, Proceedings of the ASME 2021 International Mechanical Engineering Congress & Exposition, Nov. 1-5, 2021, Virtual, Online  

C50

Wang, J.; Shen, Y. (2021) “SAFE-DISPERSION: A graphical user interface for modeling guided wave propagation in elastic solids”, 2021 SPIE Smart Structures and NDE, Mar. 22-26, Digital Forum, Online  

C49

Tian, Y.; Shen, Y.; Qin, X. (2021) “Converting Lamb modes into shear horizontal waves using a resonance-based metamaterial”, 2021 SPIE Smart Structures and NDE, Mar. 22-26, Digital Forum, Online  

C48

Tian, Y.; Shen, Y.; Shang, Z. (2021) “An omnidirectional shear horizontal wave transducer based on thickness mode (d33) piezoelectric wafer active sensors ”, 2021 SPIE Smart Structures and NDE, Mar. 22-26, Digital Forum, Online  

C47

Yin, X.; Shen, Y.; Qin, X. (2021) “Modulating Lamb waves with a tunable ultrasonic lens”, 2021 SPIE Smart Structures and NDE, Mar. 22-26, Digital Forum, Online  

C46

Cen, M.; Shen, Y.; Shang, Z. (2021) “Impact Damage Imaging and Quantification in Composite Structures Utilizing Nonlinear Ultrasonics Measured by Scanning Laser Doppler Vibrometry”, 2021 SPIE Smart Structures and NDE, Mar. 22-26, Digital Forum, Online  

C45

Cen, M.; Shen, Y. (2020) “Damage detection in composite structures via scanning laser doppler vibrometry using linear and nonlinear ultrasonic wave features”, Proceedings of the ASME 2020 International Mechanical Engineering Congress & Exposition, Nov. 16-19, 2020, Virtual, Online  

C44

Song, Y.; Shen, Y. (2020) “Steerable unidirectional wave emission from a single piezoelectric transducer using a shape memory alloy composite metasurface”, Proceedings of the ASME 2020 International Mechanical Engineering Congress & Exposition, Nov. 16-19, 2020, Virtual, Online  

C43

Song, Y.; Shen, Y. (2020) “Programmable waveguiding of ultrasonic waves for regional damage detection using elastic metamaterials”, Proceedings of the ASME 2020 International Mechanical Engineering Congress & Exposition, Nov. 16-19, 2020, Virtual, Online  

C42

Yin, X.; Shen, Y. (2020) “A waveguide ultrasonic phased array radar for high temperature equipment monitoring”, Proceedings of the ASME 2020 International Mechanical Engineering Congress & Exposition, Nov. 16-19, 2020, Virtual, Online  

C41

Wang, J.; Shen, Y. (2020) “A spectral correlation based nonlinear ultrasonic resonance technique for fatigue crack detection”, Proceedings of the ASME 2020 International Mechanical Engineering Congress & Exposition, Nov. 16-19, 2020, Virtual, Online  

C40

Shen, Y.; Cen, M. (2019) “Delamination detection in composite plates using linear and nonlinear ultrasonic guided waves”, Proceedings of the 2019 International Mechanical Engineering Congress & Exposition, Nov. 11-14, 2019, Salt Lake City, Utah, USA  

C39

Song, Y.; Shen, Y. (2019) “Shape memory metamaterials with adaptive bandgaps for ultra-wide frequency spectrum vibration control”, Proceedings of the 2019 International Mechanical Engineering Congress & Exposition, Nov. 11-14, 2019, Salt Lake City, Utah, USA  

C38

Tian, Y.; Shen, Y. (2019) “Selective guided wave mode transmission enabled by local resonance based ultrasonic metamaterial”, Proceedings of the 2019 International Mechanical Engineering Congress & Exposition, Nov. 11-14, 2019, Salt Lake City, Utah, USA  

C37

Wang, J.; Shen, Y. (2019) “Numerical investigation of nonlinear Lamb wave time reversing for fatigue crack detection”, Proceedings of the 2019 International Mechanical Engineering Congress & Exposition, Nov. 11-14, 2019, Salt Lake City, Utah, USA  

C36

Wang, J.; Shen, Y. (2019) "Lamb wave virtual time reversal damage detection algorithm with transduce transfer function compensation", 2019 SPIE Smart Structures and NDE, March 3-7, 2019, Denver, Colorado, USA.  

C35

Shen, Y.; Tian, Y.; Wang J.; Cen, M. (2019) "Modeling and experiments on nonlinear ultrasonic guided waves for fatigue crack detection and evaluation", the 11th International Workshop on Structural Health Monitoring, September 10-12, 2019, Stanford, USA.  

C34

Shen, Y.; Cen, M.; Xu, W. (2019) “Scanning laser vibrometry imaging of fatigue cracks via nonlinear ultrasonic guided waves scattering and mode conversion”, SPIE Smart Structures and NDE, Mar. 3-7, 2019, Denver, Colorado, USA.  

C33

Tian, Y.; Shen, Y.; Rao, D.; Xu, W. (2019). “Enhanced identifiability of nonlinear ultrasonic superharmonics for crack detection using an aluminum-lead composite bandgap meta-surface”, Proceedings of the 2018 Health Monitoring of Structural and Biological Systems XIII, March. 3-7, 2019, Denver, Colorado, USA.  

C32  

Wang, J.; Shen, Y. (2018) “Virtual time-reversal tomography for impact damage detection in self-sensing piezoelectric composite plates”, the 4th International Conference on Structural Health Monitoring and Integrity Management, Oct. 21-23, 2018, Hangzhou, China.  

C31

Tian, Y.; Shen, Y. (2018) “Design and application of a bandgap meta-surface for fatigue damage detection with superharmonic nonlinear ultrasonic technique”, the 4th International Conference on Structural Health Monitoring and Integrity Management, Oct. 21-23, 2018, Hangzhou, China.  

C30

Shen, Y. (2018) “Local interaction simulation approach for massively parallel computation of ultrasonic guided waves”, the 4th International Conference on Structural Health Monitoring and Integrity Management, Oct. 21-23, 2018, Hangzhou, China.  

C29

Tian, Y.; Shen, Y. (2018) “Improved nonlinear ultrasonic guided wave damage detection using a bandgap meta-surface”, Proceedings of the 2018 International Mechanical Engineering Congress & Exposition, Nov. 9-15, 2018, Pittsburgh, Pennsylvania, USA.  

C28

Wang, J.; Shen, Y. (2018) “Guided wave generation and propagation in self-sensing piezoelectric composite plates for structural health monitoring”, Proceedings of the 2018 International Mechanical Engineering Congress & Exposition, Nov. 9-15, 2018, Pittsburgh, Pennsylvania, USA.  

C27

Shen, Y.; Roy, N.; Wang, J.; Liu, Z.; Rao, D.; Xu, W. (2018) “Amplitude and sweeping direction dependent nonlinear ultrasonic resonance spectroscopy for fatigue crack detection”, Proceedings of the 2018 International Mechanical Engineering Congress & Exposition, Nov. 9-15, 2018, Pittsburgh, Pennsylvania, USA.  

C26

Shen, Y.; Wang, J.; Xu, W. (2018) “Nonlinear scattering features of guided waves from fatigue cracks”, 2018 SPIE Smart Structures and NDE, March 4-8, 2018, Denver, Colorado, USA.  

C25

Shen, Y.; Wang, J.; Ni, Y.Q. (2017) “Structural health monitoring of high-speed railways using ultrasonic guided waves”, 11th International Workshop on Structural Health Monitoring, September 12-14, 2017, Stanford, USA.  

C24

Shen, Y.; Wang, J. (2017) “Guided wave generation and propagation in piezoelectric composite plates for establishing structural self-awareness”, 11th International Workshop on Structural Health Monitoring, September 12-14, 2017, Stanford, USA.  

C23

Shen, Y. (2017) “An efficient modeling strategy for linear and nonlinear guided wave propagation in complex structures”, CCTAM-2017, August 13-16, 2017, Beijing, China.  

C22

Shen, Y. (2017) “Numerical investigation of nonlinear interactions between multimodal guided waves and delamination in composite structures”, 2017 SPIE Smart Structures and NDE, March 25-29 2017, Portland, Oregon, USA.  

C21

Shen, Y.; Cesnik, C.E.S. (2016) “Efficient Modeling of Nonlinear Scattering of Ultrasonic Guided Waves From Fatigue Cracks Using Local Interaction Simulation Approach”, International Mechanical Engineering Congress & Exposition, Nov. 11-17, 2016, Phoenix, AZ.  

C20

Shen, Y.; Cesnik, C.E.S. (2016) “In-situ Fatigue Damage Detection for Railway Structures Using Nonlinear Ultrasonic Guided Waves”, 1st International Workshop on Structural Health Monitoring for Railway System, Oct. 12-14, 2016, Qingdao, China.  

C19

Shen, Y.; Cesnik, C.E.S. (2016) “Modeling of fatigue crack induced nonlinear ultrasonics using a highly parallelized explicit local interaction simulation approach”, 2016 SPIE Smart Structures and NDE, March 20-24 2016, Las Vegas, NV.  

C18

Bhuiyan, Y.; Shen, Y.; Giurgiutiu, V. (2016) “Ultrasonic inspection of multiple-rivet-hole lap joint cracks using global analysis with local finite element approach”, 2016 SPIE Smart Structures and NDE, March 20-24 2016, Las Vegas, NV.  

C17

Shen, Y.; Zhang, H.; Cesnik, C.E.S. (2015) “CLoVER Transducers for Static and Dynamic Strain Sensing”, 10th International Workshop on Structural Health Monitoring, September 1-3 2015, Stanford, CA.  

C16

Shen, Y.; Cesnik, C.E.S. (2015) “Hybrid Local FEM/Global LISA Modeling of Guided Wave Propagation and Interaction with Damage in Composite Structures”, 2015 SPIE Smart Structures and NDE, March 8-12 2015, San Diego, CA.  

C15

Shen, Y.; Giurgiutiu, V. (2014) “Excitability of Guided Waves in Composites with PWAS Transducers”, Review of Progress in Quantitative Nondestructive Evaluation, July 20-25 2014, Boise, Idaho.  

C14

Wu, W.; Shen, Y.; Qu, W.; Xiao, L.; Giurgiutiu, V. (2014) “Fatigue Crack Damage Detection Using Subharmonic Component with Nonlinear Boundary Condition”, Review of Progress in Quantitative Nondestructive Evaluation, July 20-25 2014, Boise, Idaho.  

C13

Shen, Y.; Giurgiutiu, V. (2014) “WFR-2D: An Analytical Model for PWAS-Generated 2-D Ultrasonic Guided Wave Propagation”, 2014 SPIE Smart Structures and NDE, March 9-13 2014, San Diego, CA.  

C12

Shen, Y.; Bao, J.; Giurgiutiu, V. (2013) “Health Monitoring of Aerospace Bolted Lap Joints Using Nonlinear Ultrasonic Spectroscopy: Theory and Experiments”, 9th International Workshop on Structural Health Monitoring, Sept. 10th – 12th, 2013, Stanford University, Stanford, CA.  

C11

Bao, J.; Shen, Y.; Giurgiutiu, V. (2013) “Linear and Nonlinear Finite Element Simulation of Wave Propagation through Bolted Lap Joint”, 54th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, April 8-11, 2013, Boston, MA, Chapter DOI: 10.2514/6.2013-1902  

C10

Shen, Y.; Giurgiutiu, V. (2013) “Modeling of Guided Waves for Detection of Linear and Nonlinear Structural Damage”, 2013 SPIE Smart Structures and NDE, March 10-14 2013, San Diego, CA, 86951S-86951S-15  

C09

Shen, Y.; Giurgiutiu, V. (2012) “Simulation of Interaction between Lamb Waves and Cracks for Structural Health Monitoring with Piezoelectric Wafer Active Sensors” ASME 2012 Conference on Smart Materials, Adaptive Structures, and Intelligent Systems SMASIS, Sept. 19-21, 2012, Stone Mountain, GA, paper SMASIS2012-7917  

C08

Shen, Y.; Giurgiutiu, V. (2012) “Predictive Simulation of Nonlinear Ultrasonics”, 2012 SPIE Smart Structures and NDE, March 11-15 2012, San Diego, CA, SPIE Vol. 8348, paper 8348-86  

C07

Gresil, M.; Giurgiutiu, V.; Shen, Y.; Poddar, B (2012) “Guidelines for Using the Finite Element Method for Modeling Guided Lamb Wave Propagation in SHM Process”, 6th European Workshop on Structural Health Monitoring, July 3-6 2012, Dresden, Germany, paper # Tu.2.E.1  

C06

Gresil, M.; Giurgiutiu, V.; Shen, Y (2012), “Predictive Simulation of Structural Sensing”, 53rd AIAA Structures, Structural Dynamics, and Materials Conference, April 23rd 2012, Honolulu, Hawaii, CID: 1215950  

C05

Gresil, M.; Lin, B.; Shen, Y.; Giurgiutiu, V. (2011) ‘Predictive Modeling of Space Structures for SHM with PWAS Transducers” ASME 2011 Conference on Smart Materials, Adaptive Structures, and Intelligent Systems SMASIS 2011, Sept. 18-21, 2011 Phoenix, AZ  

C04

Gresil, M.; Shen, Y.; Giurgiutiu, V. (2011) “Predictive Modeling of Ultrasonic SHM with PWAS Transducers”, 8th International Workshop on Structural Health Monitoring IWSHM 2011, Sept. 13-15 2011, Stanford University, CA  

C03

Gresil, M.; Shen, Y.; Giurgiutiu, V. (2011) “Benchmark Problems for Predictive FEM Simulation of 1-D and 2-D Guided Waves for SHM with Piezoelectric Wafer Active Sensors”, Review of Progress in Quantitative Nondestructive Evaluation QNDE 2011, July 17-22, 2011, University of Vermont, Burlington, VT  

C02

Yu, L.; Shin, Y.J.; Wang, J.; Shen, Y. (2011) “An ultrasonic guided wave sensor for gas accumulation detection in nuclear emergency core cooling systems”, 8th International Workshop on Structural Health Monitoring, September 2011, Stanford, CA.  

C01

Shen, Y.; Qu, W.; Xiao, L. (2010) “Plasticity-Driven Damage Detection Using Lamb Waves For Stiffened Plate” Engineering Plasticity and Its Applications: Proceedings of the 10th Asia-Pacific Conference: pp. 250-254. Nov. 15-17, 2010, Wuhan, China